Cleaning services
Silicone re-sealing: remove mouldy sealant, replace with anti-mould silicone
Once the silicone around a bathtub, shower tray or sink turns black, the mould has usually grown into the sealant, so it comes back however often you clean it. We send a specialist and an assistant to remove the old sealant, treat the mould, dry the joint and apply anti-mould silicone. Send us photos first and we'll confirm the scope and quote.
Clear prices · total shown before you book · follow-up if anything goes wrong · all over Hong Kong
Silicone re-sealing prices
Separate visit: a specialist plus an assistant, with mould treatment, anti-mould silicone and materials included.
With hourly cleaning (quote add-ons)
- Sealing joints only; re-fixing undermount basins, mirrors or cabinets held on by silicone is quoted separately.
- Keep dry for 24 hours after sealing.
Why cleaning doesn't fix it
Black silicone is usually mould growing inside the sealant, not dirt on the surface. Mould remover can lighten it, but it usually turns black again within a week or two. The lasting fix is to remove the old sealant, clean the mould underneath and seal the joint again.
What we do
We remove the old silicone along the bathtub, shower tray, washbasin, toilet base or kitchen sink, clear the residue with sealant remover, treat mould in the joint, wipe and dry it, mask the edges, then apply and smooth anti-mould silicone. The assistant removes the sealant and treats the mould; the specialist applies the silicone and checks the work.
Prices
Separate visit (a specialist plus an assistant, with mould treatment, anti-mould silicone and materials included): HK$2,380 for 1 bathroom; HK$3,280 for 2 bathrooms, or 1 bathroom plus the kitchen sink; HK$1,280 for each additional bathroom. With hourly cleaning, choose it in the cleaning quote's add-ons: HK$1,380 for one area (up to 3 m) or HK$1,880 for a whole bathroom. If the old sealant is very thick or in several layers, we'll tell you about any extra charge before we start.
Sealing joints only
The price covers silicone that seals joints against water. Undermount basins, mirrors and cabinets without screws are sometimes held on by silicone. For these, the specialist checks photos and does a push test on site; if something needs re-fixing, we quote it separately, fix it with structural adhesive, level it and then seal it. If something is already loose or badly installed, we'll tell you before we start.
Afterwards
Keep the joints dry for 24 hours, so it's best not to use that bathtub or shower that day; we can schedule around this. In a poorly ventilated bathroom, mould can grow on new silicone too, so run the extractor fan or open a window after showering.
FAQ
How do I know if I need re-sealing rather than cleaning?▾
If black spots remain after mould remover, or the silicone has yellowed, lifted at the edges or cracked, re-sealing is the better choice. Send us photos and we'll tell you which suits.
How long does one bathroom take?▾
Usually about 2 to 3 hours, depending on how thick the old sealant is and how much there is. Keep it dry for 24 hours afterwards.
Will removing the old silicone loosen the cabinet or basin?▾
The silicone along a bathtub, shower tray or sink edge only seals the joint against water; cabinets and basins are held by screws or brackets, so removing it won't move them. Some undermount basins, mirrors or cabinets without screws are held on by silicone, though. For these we check photos and do a push test on site first; if something needs re-fixing, we quote it separately.
What silicone do you use?▾
Anti-mould silicone made for bathrooms and kitchens. If you'd like a particular colour, mention it when booking and we'll check stock first.
Can it be done together with cleaning?▾
Yes. In the cleaning quote, choose "Silicone Re-sealing (anti-mould)" under add-ons: HK$1,380 for one area or HK$1,880 for a whole bathroom, cheaper than a separate visit.
